{"title":"Chevrolet \u0026 GMC C\/K 1973-1986","description":null,"products":[{"product_id":"1997-2003-f-150-c-notch-weld-on-kit-made-in-the-u-s-a-reklez-copy","title":"1973-1987 C10 2wd Reklez C Notch Weld on Kit","description":"\u003cp\u003eGet better clearance and stop bottoming out (rear end hits your factory frame) with our 1973-1987 C10 C Notch. NOT universal fit made for the C10 Trucks for easy installation. Installation that can be done in a couple of hours. Grinding and Welding is Required with our kit. \u003c\/p\u003e\n\u003cp\u003eFeatures and Benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 1\/4\" Thick Steel for added strength \u003c\/li\u003e\n\u003cli\u003eRecommend on 6\", \u0026amp; 7\" Drop. \u003c\/li\u003e\n\u003cli\u003eSimple design for quick installation (can be installed roughly 2-3 hours \u003c\/li\u003e\n\u003cli\u003eCome pre welded so you just install and weld the sides\u003c\/li\u003e\n\u003cli\u003eFree tech support with your purchase\u003c\/li\u003e\n\u003cli\u003eMade in the USA \u003c\/li\u003e\n\u003cli\u003eIncluded is both sides of C Notch Frame Plates and Bumpstops \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Reklez Suspension Works","offers":[{"title":"Default Title","offer_id":57209997918374,"sku":null,"price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/Screenshot2024-08-26at11.49.40PM.png?v=1788023221"},{"product_id":"djm-98446-fk2356-5","title":"1973-1987 C-10 5 Inch Rear Lowering Kit (With Fully Adjustable Pinion Angle)","description":"\u003cp\u003e1973-1987 C-10 5 Inch Rear Lowering Kit Get the stance your C-10 deserves with DJM’s 5 Inch Rear Lowering Kit, engineered specifically for 1973-1987 Chevy\/GMC C-10 trucks. This kit relocates your rear axle above the leaf springs, instead of below them. This drops the rear end a full 5 inches for a clean, lowered look without sacrificing ride quality. At the heart of the kit is a fully adjustable pinion angle bracket! Every rear end sits a little differently – especially once you’ve swapped in an aftermarket 9-inch, 12-bolt, or other non-stock differential – and getting that angle wrong leads to driveline vibration and premature U-joint wear. DJM’s upper axle plate lets you rotate the axle to the exact pinion angle your setup calls for, so the finished truck drives as good as it looks! No matter what’s hanging under it. What’s included: New axle locator brackets with fully adjustable pinion angle U-bolts and spring plates Full installation instructions Why DJM DJM Suspension has been lowering trucks and SUVs since the 1970s! Every kit is designed, engineered, and built right here in the USA. We’re a family-owned company, not a faceless import brand, and we stand behind every part that leaves our shop. When you drop your truck with DJM, you’re getting decades of real-world engineering, not a guess. Built and manufactured in the USA by DJM Suspension. Universal Flip Kit Instructions Recommended pairing: DJM 1800 series shocks (sold separately)\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e FK2356-5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c-10-5-inch-rear-lowering-kit-with-adjustable-pinion-angle\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234952159398,"sku":"FK2356-5","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-fk2356-5-01_e609d71e-ce78-467e-b7d3-d3515a141cae.jpg?v=1788286353"},{"product_id":"djm-38134-djm1120-2-4","title":"1973-1987 C10 2 inch Front \/ 4 inch Rear Complete Lower Kit (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 2 inch Front \/ 4 inch Rear Complete Lower Kit (Coil Springs) Engineered coil springs in the front lower it 2 inches. Hanger brackets and longer shackles relocate the rear leaf springs for 4 inch drop. Recommended Shocks: Front 1309 Rear 2200 Front Coil Springs Rear Hanger Shackle Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM1120-2\/4\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-2-inch-front-4-inch-rear-complete-lower-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234987679910,"sku":"DJM1120-2\/4","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-c7af2010fcb06ca1-hd-white_ccf85862-18e0-4742-869e-bfa8f53f0085.png?v=1788385924"},{"product_id":"djm-9320-djm2353-3-5ltd","title":"1973-1987 C10 Complete 3 inch Front \/ 5 inch Rear Lowering Kit (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 Complete 3 inch Front \/ 5 inch Rear Lowering Kit This kit uses 3 inch front lowering coils and a flip kit that drops the rear 5 inches. No “C-section” is required and there are new u-bolts and leaf spring plates included to replace the original parts, if they need to be replaced. Shocks are included. DJM recommends: Front Shock 1309 (sold each) Rear Shock 2100 (sold each) Front Coil Spring Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2353-3\/5LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-front-5-inch-rear-lowering-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991448230,"sku":"DJM2353-3\/5LTD","price":655.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-1227daca79002e27-hd-white_db66112e-74d6-49b7-b3e1-88cfed73c3b2.png?v=1788384417"},{"product_id":"djm-9318-djm2045l-3-5ltd","title":"1973-1987 C10 Complete 3 inch front \/ 5 inch rear Lowering Kit (1 inch rotors) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 Complete 3 inch front \/ 5 inch rear Lowering Kit (1 inch disc brakes) Note: For trucks with 1″ disc brake rotor only. Drop spindles, as classic as the truck it’s self, sport a 3″ drop in the front. What’s important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1.25″ rotor use ( DJM2045H-3\/5 ). The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Shocks are included. DJM recommends: Front Shock 1409 (sold each) Rear Shock 2100 (sold each) Drop Spindle Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045L-3\/5LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-front-5-inch-rear-lowering-kit-1-inch-rotors-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991546534,"sku":"DJM2045L-3\/5LTD","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-241e41959272250a-hd-white_46f94db9-6da2-4932-9298-9141c6cdfe08.png?v=1788384410"},{"product_id":"djm-9316-djm2045h-3-5ltd","title":"1973-1987 C10 Complete 3 inch Front \/ 5 inch Rear Lowering Kit (For 1.25 inch brake rotors) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 Complete 3 inch Front \/ 5 inch Rear Lowering Kit (For 1.25 inch brake rotors) Note: For trucks with 1.25 inch thick brake rotors. If you have a 1 inch rotor use ( DJM2045L-3\/5 ). Drop spindles are used to lower the front 3 inches. The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Shock are included with this kit. DJM recommends: Front Shock 1409 (sold each) Rear Shock 2100 (sold each) Drop Spindle Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045H-3\/5LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-front-5-inch-rear-lowering-kit-for-1-25-inch-brake-rotors-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991710374,"sku":"DJM2045H-3\/5LTD","price":815.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-241e41959272250a-hd-white_f939a3e2-c143-43ea-a3a0-763037417479.png?v=1788384411"},{"product_id":"djm-9314-djm2456-3-5ltd","title":"1973-1987 C10 Complete 3 inch front \/ 5 inch Rear Lowering kit (Disc Brake Front) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 Complete 3 inch front \/ 5 inch Rear Lowering kit (Disc Brake Front) It’s probably time for new bushings and ball joints, why not get them already installed in a new Lower Arms and have 3 inch of drop as a bonus?! You can literally take it out of the box and install in the factory location without doing anything else. The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Shocks are included. DJM Recommends: Front Shock 1409 (sold each) Rear Shock 2100 (sold each) Replacement parts Ball Joint 6117 Bushing Kit BK2356L Lower Control Arm Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-3\/5LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-front-5-inch-rear-lowering-kit-disc-brake-front-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991743142,"sku":"DJM2456-3\/5LTD","price":1060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-828f0f4faa65344f-hd-white_faf13363-0037-45da-b8e7-c0f190ce1dbf.png?v=1788383785"},{"product_id":"djm-9312-djm2456-5-5ltd","title":"1973-1987 C10 Complete 5 inch Front \/ 5 inch Rear Lowering Kit (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 Complete 5 inch Front \/ 5 inch Rear Lowering Kit It’s probably time for new bushings and ball joints, why not get them already installed in a new Lower Arm and have 3″ of drop as a bonus?! You can literally take it out of the box and install in the factory location without doing anything else, sweet! To get the 5″ drop, we added a 2″ coil spring to the arms to complete the slam! The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Shocks are included. DJM recommends: Front shock 1309 (sold each) Rear shock 2100 (sold each) Replacement Ball Joint 6117 (Moog K6117) Replacement Bushing Kit BK2456L Lower Control Arm Instructions Front Coil Spring Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-5\/5LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-5-inch-front-5-inch-rear-lowering-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991775910,"sku":"DJM2456-5\/5LTD","price":1170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-a44452e89719d831-hd-white_f92b3cc4-012e-47b2-a76b-d997868c9e37.png?v=1788367521"},{"product_id":"djm-9310-djm2045l-5-5-ltd-1-8243-rotor","title":"1973 – 1987 Chevy\/GMC C10 5inch Front\/5inch Rear Lowering Kit (1 inch rotor) (Shocks Included)","description":"\u003cp\u003e1973 – 1987 C10 Complete Lowering kit The 3 inch drop spindles combined with a set of 2 inch engineered coil springs lower the front a total of 5 inches The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-sect” ion” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Drop Spindles Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045L-5\/5 LTD (1\u0026amp;#8243;rotor)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-gmc-c10-5inch-front-5inch-rear-lowering-kit-1-inch-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991808678,"sku":"DJM2045L-5\/5 LTD (1\u0026#8243;rotor)","price":1005.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-dde1621aabebfa8e-hd-white_fa458fce-6fff-4247-93d0-1d0f66762c6b.png?v=1788367477"},{"product_id":"djm-9306-djm2045h-5-5-ltd-1-25-8243-rotor","title":"1973 – 1987 Chevy\/GMC C10 5inch Front\/5inch Rear Lowering Kit (1.25 inch rotor)","description":"\u003cp\u003e1973 – 1987 C10 Complete Lowering Kit You will have either a 1 inch or 1.25 inch rotor. If you have a 1″ rotor use ( DJM2045L-5\/5 ). The 3 inch lowering spindle combined with a set of 2 inch engineered springs will lower the front about 5 inches total. The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced. Shocks are included. DJM recommends: Front Shock 1309 (Sold Each) Rear Shock 2100 (Sold Each) Drop Spindles Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045H-5\/5 LTD (1.25\u0026amp;#8243;rotor)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-gmc-c10-5inch-front-5inch-rear-lowering-kit-1-25-inch-rotor\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991841446,"sku":"DJM2045H-5\/5 LTD (1.25\u0026#8243;rotor)","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-dde1621aabebfa8e-hd-white_4cef0492-8010-44af-805c-e229461f2a24.png?v=1788367516"},{"product_id":"djm-9303-djm2456-5-5-ltd","title":"1973-1987 Chevy\/GMC C10 Control Arm Lowering Kit 5inch Front\/5inch Rear (Shocks Included)","description":"\u003cp\u003e1973 – 1987 C10 Complete DJM 5\/5 Plus Kit It’s probably time for new bushings and ball joints, why not get them already installed in a new Calmax Lower Arm and have 3″ of drop as a bonus! From our factory, new ball joints, mounting shafts with urethane bushings and urethane bumpstops are installed. You can literally take it out of the box and install in the factory location with out doing anything else, sweet! The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced. The same kit as the DJM2456-5\/5 PLUS Calmax Upper Control Arms DJM’s Plus kits add value to your complete suspension kit by including upper control arms. The upper arms are an option for most kits that will help nail down a good alignment and have the bonus of style so all of your suspension components have that Calmax “look”. Choosing a plus kit gives you the best deal on a complete lowering kit and if you add Calmax SuperShox you have the best kits for the best price! Replacement parts Ball Joint 6117 Bushing Kit BK2356L Lower Control Arm Instructions Upper Control Arms Front Coil Spring Instructions Rear Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-5\/5+LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-gmc-c10-control-arm-lowering-kit-5inch-front-5inch-rear-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57234991874214,"sku":"DJM2456-5\/5+LTD","price":1655.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-46b3c2c5fc0ceacf-hd-white_01997672-dd4c-4670-be59-07a66a0b730a.png?v=1788385900"},{"product_id":"djm-6340-ca2356l-3","title":"1971-1987 C10 3 inch Lowering Control Arms (Disc Brakes Only)","description":"\u003cp\u003eWhy Buy from DMJ Suspension Made in America Not just these C10 control arms, every part is designed, fabricated, and tested in the USA to deliver strength, performance, and pride in every ride. Trusted Since the 1970s Decades of innovation and craftsmanship make DJM Suspension a trusted name among custom truck enthusiasts looking for lowering control arms. Easy Installation Pre-assembled lower control arms and other components save you time and provide a straightforward, bolt-on installation for garage or shop projects. Lowering control arms for a 3 inch drop with stock coil springs. Correct alignment, clearance issues and ball joint angles are all designed to give an exceptional lowered ride. New ball joints, urethane bushings, pivot sleeves and mounting shafts come installed for bolt on replacement. Shocks are NOT included with this kit. DJM Recommends: If you have drum brakes use CA2355L-3 Recommended Parts Shock 1409 Replacement parts Ball point 6117 Bushing kit BK2356L About DJM Suspension DJM Suspension began in the early 1970s from a lifelong passion for custom vehicles. As a family-owned American manufacturer, we have led the lowering control arms industry for generations. Our mission is to help drivers achieve the perfect stance without sacrificing performance or comfort. Learn more about DJM Suspension Frequently Asked Questions Will these control arms work with drum brakes? No, this C10 lower control arms model fits disc brake setups only. If your truck has drum brakes, please use part number CA2355L-3 . Do shocks come with this kit? No, we only sell lower control arms in this kit. Shocks are sold separately. We recommend using Shock 1409 for the best performance. What replacement parts are available? We can hook you up with replacement parts such as Ball Joint 6117 and Bushing Kit BK2356L. Is professional installation required? Not necessarily. The C10 lower control arms come preassembled, making installation simple for most enthusiasts, grease monkeys, or auto shops.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1971-1972, 1971-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e CA2356L-3\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1971-1987-c-10-3-inch-control-arms-disc-brakes-only\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235004784806,"sku":"CA2356L-3","price":610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-ca2356l-3-01-hd-white.jpg?v=1788297766"},{"product_id":"djm-6818-ca2356u","title":"1973 – 1987 Chevy C-10 Upper Control Arms (Disc brakes only)","description":"\u003cp\u003eUpper control arms won’t effect ride height but they do help with alignment issues and optimize ball joint angles on lowered trucks. Featuring new, all steel ball joints, urethane bushings with mounting shafts installed. Replacement ball joint 6136 Replacement Bushing Kit BK2356U Installation Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e CA2356U\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1971-1987-chevy-c-10-upper-control-arms-disc-brakes-only\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235004915878,"sku":"CA2356U","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-ca2345u-01_233c72b9-9239-4829-8f14-c712d0d668d2.jpg?v=1788287231"},{"product_id":"djm-6370-ds2045h-3","title":"1973 – 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)","description":"\u003cp\u003eUpgrade your truck or SUV with the DJM Suspension 3 Inch, C-10, Lowering Spindle , engineered to deliver improved handling, a smoother ride, and a clean, aggressive stance. Designed for precision and durability, this lowering kit is the perfect solution for drivers looking to enhance both performance and appearance. The DS2045H-3 lowering spindle reduces your vehicle’s center of gravity, resulting in better cornering, reduced body roll, and a more controlled driving experience. Whether you’re cruising the streets or upgrading your daily driver, DJM Suspension ensures quality you can trust. Key Features: Precision-engineered for optimal fit and performance Improves handling and overall ride quality Lowers center of gravity for enhanced stability Durable, high-quality components built to last Provides a sleek, aggressive lowered stance Why Choose DJM Suspension? With decades of experience in suspension engineering, DJM Suspension is known for delivering reliable, high-performance lowering kits that meet the demands of truck and SUV enthusiasts. Perfect For: Street performance upgrades Custom truck builds Drivers seeking improved handling and style It’s very important you correctly measure the thickness of your brake rotor. This spindle if for a 1.25″ break rotor. If you have a 1″ thick rotor use DS2045L-3. Recommended Parts: 14.5″ Loop \/ Loop SuperShock (1409) Tech Tip Regarding Aftermarket Brake Rotors We’ve heard about some problems with clearance on brake rotors, we did some testing and here is what we found. Read More\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DS2045H-3\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-c10-3-inch-drop-spindles-1-25-inch-rotor\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005046950,"sku":"DS2045H-3","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-ds2045h-3-01.jpg?v=1788287232"},{"product_id":"djm-6369-ds2045l-3","title":"1973 – 1987 C10 3″ Drop Spindles (1.0″ Rotor)","description":"\u003cp\u003eA close look at our spindles will tell the story of precision machining resulting in ball joints \u0026amp; tie-rods properly positioned, quality meehanite castings machined as accurately as the 4142 Chrome moly spuds (axles) inserted into them. All of this adds up to a strong accurate part. It’s a fair amount of work to change your spindle don’t waste your effort with inferior spindles. Speaking of wasting time, make sure you get the right spindle set before you start your installation! It’s very important you correctly measure the thickness of your brake rotor, if you get the wrong one you will discover this when you try to assemble your brakes after installing the spindle. Guaranteed to make you say bad words! Here’s the deal a 1.25″ thick rotor use DS2045H-3 or, if you have a 1.0″ thick brake rotor you’re in the right place! This simple mistake has ruined more than one install experience! Calmax Control Arms Installation Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DS2045L-3\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-3-drop-spindles-1-0-rotor\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005210790,"sku":"DS2045L-3","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-ds2045h-3-01_f742d7a7-f1ac-4c25-9d69-d3f5a0b7e8bb.jpg?v=1788287237"},{"product_id":"djm-6350-cs2353-2","title":"1963 – 1987 C-10 2″Front Lowering Coil Spring","description":"\u003cp\u003eCoil springs are the most cost-effective way to lower most trucks and SUVs. They can be used to lower from as little as 1″ to as much as 5″ depending on applications. DJM Coils are computer tested and paired up to give you the most consistent drop you can have with a spring. Coils can be used in combination with spindles and control arms for more lowering. Learn more about coil springs here at DJM University This 2″ front coil set can be used as a factory spring replacement for a 2″ drop and it can be combined with Calmax Control Arms for deeper drops! Recommend Parts Shock number 1309 ,\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1963-1972, 1963-1987, 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e CS2353-2\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1963-1987-c-10-2%e2%80%b3front-lowering-coil-spring\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005276326,"sku":"CS2353-2","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-3934487994bb584c-hd-white_06090806-aac1-4151-ac2e-76fe1b761629.png?v=1788365691"},{"product_id":"djm-6337-cs2353-3","title":"1963 – 1987 C-10 3″Front Lowering Coil Spring","description":"\u003cp\u003eCoil springs are the most cost effective way to lower most trucks and suv’s. They can be used to lower from as little as 1″ to as much as 5″ depending on applications. DJM Coils are computer tested and paired up to give you the most consistent drop you can have with a spring. Coils can be used in combination with spindles and control arms for more lowering. Learn more about coil springs here at DJM University This 3″ front coil set can be used as a factory spring replacement for a 3″ drop and it can be combined with Calmax Control Arms for deeper drops! Recommended Parts Shock number 1309 ,\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1963-1972, 1963-1987, 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e CS2353-3\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1963-1972-c-10-3%e2%80%b3front-lowering-coil-spring\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005341862,"sku":"CS2353-3","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-cs2353-3-01-hd-white.jpg?v=1788297766"},{"product_id":"djm-6373-hs1120-4","title":"1973-1987 C10 4 inch Rear Axle Hanger \u0026 Shackle Kit","description":"\u003cp\u003e1973-1987 C10 4 inch Rear Axle Hanger \u0026amp; Shackle Kit New leaf spring eye hanger brackets and shackles lower the rear a total of 4 inches. Recommended Parts: Shock number 2200 Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e HS1120-4\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-c10-4-inch-rear-axle-hanger-shackle-kit\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005472934,"sku":"HS1120-4","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-hs1120-4-01-hd-white.jpg?v=1788297767"},{"product_id":"djm-6374-fk1024-5","title":"1973-1987 C10 5 inch Rear Axle Flip Kit","description":"\u003cp\u003e1973-1987 C10 5 inch Rear Axle Flip Kit If your looking for economy and your u-bolts and factory leaf spring plates are in good shape, no need to buy them again! This kit will give you a 5″ drop for a low price. Don’t need for a C-notch on a C-10, plenty of space above the axle! Less is more! We recommend: Rear Shock 2100 Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e FK1024-5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-c10-5-rear-axle-flip-kit\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005505702,"sku":"FK1024-5","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-fk1024-5-01-hd-white.jpg?v=1788297767"},{"product_id":"djm-6368-sh1012-2","title":"1973-1987 C10 2 inch Lowering Shackles","description":"\u003cp\u003e1973-1987 C10 2 inch Lowering Shackles Still the most popular way to get rid of that “stink bug look” trucks have from the factory. Drop Shackles have been around since the beginning of sport trucks and still rule if you just want to get that rear end down. 2″is the typical drop and that’s exactly what you get on your C-10 with these DJM Shackles Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e SH1012-2\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-c10-2-lowering-shackles-by-djm\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005571238,"sku":"SH1012-2","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-sh1012-2-01-hd-white.jpg?v=1788297766"},{"product_id":"djm-6375-fk1024-ltd","title":"1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates","description":"\u003cp\u003e1973-1987 Chevy\/GMC C10 5inch rear flip kit with new U-bolts and spring plates 5inch flip kit for your C10. New U-Bolts and spring plates for easy installation. Shocks are NOT included with this kit. DJM recommends: Rear Shocks 2100 (sold each) Flip Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e FK1024-LTD\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-gmc-c10-5inch-rear-flip-kit-with-new-u-bolts-and-spring-plates\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005604006,"sku":"FK1024-LTD","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-flip_kit-hd-white_9e650e1e-e60e-41a5-8298-20b844fbec47.png?v=1788387251"},{"product_id":"djm-15752-fk1024-c","title":"1973-1987 Chevy\/GMC C10 Rear C-Notch","description":"\u003cp\u003e1973-1987 Chevy\/GMC C10 Rear C-Notch Get more travel with these frame supports on your C-10. Sold in pairs.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet \/ GMC — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e FK1024-C\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-chevy-gmc-c10-rear-c-notch\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005735078,"sku":"FK1024-C","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-fk1024-c-01.jpg?v=1788287247"},{"product_id":"djm-6865-se1124","title":"1978–1987 C10 Shock Extenders","description":"\u003cp\u003e1978 – 1987 Chevy C-10 Shock Extenders When you use a flip kit and drop 5 or more inches your shock travel gets pretty skinny. Use shock extenders to have enough length and keeping your shock vertical. Improves shock performance! Sold in Pairs Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987, 1978-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e SE1124\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1978-1987-c10-shock-extenders\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235005866150,"sku":"SE1124","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-se1124-01-hd-white.jpg?v=1788297767"},{"product_id":"djm-6834-6117","title":"1968-1987 C10 Replacement Ball Joint — 6117","description":"\u003cp\u003eGenuine DJM Replacement Parts Replacement ball joints for Chevy C-10 Calmax control arms ( CA2356L-3 ) with disc brake spindles. Available here and at your local auto parts store!! Fits factory lower control arms with disc brakes also! Sold – each Need bushing kit? Click here BK2355L Mounting Shaft Kit? Click here XSHAFT-L\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1968-1972, 1971-1972, 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e 6117\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/6117\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235011043494,"sku":"6117","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-6117-01-hd-white.jpg?v=1788297809"},{"product_id":"djm-6367-djm2456-5-5","title":"1973 – 1987 C10 Complete 5 Inch\/5 Inch Plus Kit (Shocks Included)","description":"\u003cp\u003eIt’s probably time for new bushings and ball joints, why not get them already installed in a new Calmax Lower Arm and have 3″ of drop as a bonus! From our factory, new ball joints, mounting shafts with urethane bushings and urethane bumpstops are installed. You can literally take it out of the box and install in the factory location with out doing anything else, sweet! In fact click here to see exactly what that looks like Stacy David Knucklebuster GearzTV. To get the 5″ drop we added a 2″ coil spring to the arms to complete the slam! The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip: If your U-bolts are in bad shape, a very real possibility on a 30 – 40+ year old truck, you may consider this kit DJM2456-5\/5+LTD . Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates! The same kit as the DJM2456-5\/5 PLUS Calmax Upper Control Arms DJM’s Plus kits add value to your complete suspension kit by including upper control arms. The upper arms are an option for most kits that will help nail down a good alignment and have the bonus of style so all of your suspension components have that Calmax “look”. Choosing a plus kit gives you the best deal on a complete lowering kit and if you add Calmax SuperShox you have the best kits for the best price! Recommended parts Shock number 1309 Shock number 2100 Replacement parts Ball Joint 6117 Bushing Kit BK2356L Lower Control Arms Upper Control Arms Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-5\/5+\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-5-inch-5-inch-plus-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026051238,"sku":"DJM2456-5\/5+","price":1560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-e39bbd9c4ffedce4-hd-white_b8a4ca7a-cbaa-4de3-be26-43c61819fffa.png?v=1788385896"},{"product_id":"djm-6366-djm2456-5-5","title":"1973-1987 C-10 5 inch Front \/ 5 inch Rear Complete Lowering Kit","description":"\u003cp\u003e1973-1987 C-10 5 inch Front \/ 5 inch Rear Complete Lowering Kit Lowering control arms combined with 2 inch lowering coil springs drop the front 5 inches. Control arms come assembled with ball joints, mounting shafts, and urethane bushings. The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” is required on your C-10 because the frame leaves plenty of suspension trave even after its lowered with the 5 inch flip kit. Note: If your original rear axle u-bolts need replacing our kit, DJM2456-5\/5LTD , is this same but includes new U-bolts and leaf spring spring plates for the flip kit. Lower Control Arms Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-5\/5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c-10-5-inch-front-5-inch-rear-complete-lowering-kit\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026084006,"sku":"DJM2456-5\/5","price":865.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-6046b0e6fae60da6-hd-white_226d5033-33d6-42be-9661-e45f557b0ed6.png?v=1788384138"},{"product_id":"djm-6365-djm2045h-5-5","title":"1973 – 1987 C10 Complete 5 Inch\/5 Inch Kit (1.25″rotor) (Shocks Included)","description":"\u003cp\u003eThe good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1″ rotor use ( DJM2045L-5\/5 ). Pair the spindles up with a set of 2″ engineered DJM drop springs, combined you end up with about 5″ of total drop in the front! The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip : If your U-bolts are in bad shape, a very real possibility on a 30 – 40+ year old truck, you may consider this kit DJM2045H-5\/5LTD . Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates! Recommended parts Shock number 1309 Shock number 2100 Drop Spindles Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045H-5\/5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-5-inch-5-inch-kit-1-25rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026149542,"sku":"DJM2045H-5\/5","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-b68c91bbc1a29ea9-hd-white_fd9566ba-a1bf-459f-8ec2-54cbb59a66df.png?v=1788384447"},{"product_id":"djm-6364-djm2045l-5-5-1-8243-rotor","title":"1973-1987 C10 5 inch Front \/ 5 inch Rear Lowering Kit (1 inch Rotor) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 5 inch Front \/ 5 inch Rear Lowering Kit (1 inch Rotor) This kit is designed to work with a 1 inch thick rotor.only. If you have a 1.25 inch rotor use ( DJM2045H-5\/5 ). A combination of a 3 inch lowering spindle and 2 inch lowering coils drop the front 5 inches. The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because there is plenty of suspension travel, even after lowering it 5 inches. Note: If your original rear u-bolts need replacing use kit. DJM2045L-5\/5 LTD which includes new U-bolts and leaf spring spring plates. Drop Spindles Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045L-5\/5 (1\u0026amp;#8243;rotor)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-5-inch-front-5-inch-rear-lowering-kit-1-inch-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026477222,"sku":"DJM2045L-5\/5 (1\u0026#8243;rotor)","price":905.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-djm2045h-5-5-01_4b1773f6-b7fe-4342-b1b7-36968dbf59f4.jpg?v=1788287486"},{"product_id":"djm-6363-djm2456-3-5","title":"1973 – 1987 C-10 3 Inch Front \/ 5 Inch Rear complete lowering kit (Shocks Included)","description":"\u003cp\u003eIt’s probably time for new bushings and ball joints, why not get them already installed in a new Calmax Lower Arm and have 3″ of drop as a bonus! From our factory, new ball joints, mounting shafts with urethane bushings and urethane bumpstops are installed. You can literally take it out of the box and install in the factory location with out doing anything else, sweet! In fact click here to see exactly what that looks like Stacy David Knucklebuster GearzTV The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip : If your U-bolts are in bad shape, a very real possibility on a 30 – 40+ year old truck, you may consider this kit DJM2456-3\/5LTD . Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates! Recommended parts Shock number 1409 Shock number 2100 Replacement Parts Lower Ball Joint 6117 Lower Bushing Kit BK2356L Lower Control Arms Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-3\/5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c-10-3-inch-front-5-inch-rear-complete-lowering-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026608294,"sku":"DJM2456-3\/5","price":960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-cc09b5ebab266fa6-hd-white_bd49ac1f-2686-427e-b02c-e68181ccaaa6.png?v=1788366813"},{"product_id":"djm-6362-djm2045h-3-5","title":"1973 – 1987 C10 Complete 3 Inch Front\/5 Inch Rear Kit (1.25″ rotor) (Shocks Included)","description":"\u003cp\u003eThe good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1″ rotor use ( DJM2045L-3\/5 ). The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip : If your U-bolts are in bad shape, a very real possibility on a 30 – 40+ year old truck, you may consider this kit DJM2045H-3\/5LTD . Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates! Recommended parts Shock number 1409 Shock number 2100 Drop Spindles Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045H-3\/5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-front-5-inch-rear-kit-1-25-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026739366,"sku":"DJM2045H-3\/5","price":715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-5dcc0bd14897a602-hd-white_6847bafd-1ddb-43b4-8dae-e015634bd508.png?v=1788383411"},{"product_id":"djm-6361-djm2045l-3-5-1-8243-rotor","title":"1973-1987 C10 3 inch Front \/ 5 inch Rear Complete Lowering Kit (Spindle with 1″ rotor) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 3 inch Front \/ 5 inch Rear Complete Lowering Kit (Spindle with 1″ rotor) This kit uses 3 inch lowering spindles designed for a 1 inch thick brake rotor only . If you have a 1.25 inch thick rotor use ( DJM2045H-3\/5 ). The rear uses a flip kit in the rear for a 5 inch drop. No “C-section” required on your C-10 because the frame has plenty of clearance left for suspension travel. Note: If your original u-bolts need replacing , kit DJM2045L-3\/5LTD , includes new U-bolts and leaf spring spring plates. Drop Spindles Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045L-3\/5 (1\u0026amp;#8243; rotor)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-3-inch-front-5-inch-rear-complete-lowering-kit-spindle-with-1-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026837670,"sku":"DJM2045L-3\/5 (1\u0026#8243; rotor)","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-djm2045h-3-5-01_ff60c3d7-b9d5-4244-aeec-9d2defc543d1.jpg?v=1788287488"},{"product_id":"djm-6360-djm2353-3-5","title":"1973-1987 C10 3 inch Front \/ 5 inch Rear Lowering Kit (Coil Springs) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 3 inch Front \/ 5 inch Rear Lowering Kit (Coil Springs) This kit uses front 3 inch lowering coils and a 5 inch flip kit for the rear. No “C-section” is required. Note: If your original u-bolts need replacing, kit DJM2353-3\/5LTD , includes new U-bolts and leaf spring spring plates. Shocks are included DJM recommends: Front Shock 1309 Rear Shock 2100 Front Coil Springs Rear Flip Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2353-3\/5\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-3-inch-front-5-inch-rear-lowering-kit-coil-springs-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235026935974,"sku":"DJM2353-3\/5","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-456bb9a1a651ed05-hd-white_a63db454-fe19-4d88-99a4-0ce108a19bce.png?v=1788383438"},{"product_id":"djm-6359-djm2456-3-4","title":"1973 – 1987 C-10 3 Inch Front \/ 4 Inch Rear complete Lowering Kit (Shocks Included)","description":"\u003cp\u003eIt’s probably time for new bushings and ball joints, why not get them already installed in a new lower Arm and have 3″ of drop as a bonus! From our factory, new ball joints, mounting shafts with urethane bushings and urethane bumpstops are installed. You can literally take it out of the box and install in the factory location without doing anything else, sweet! 4″ of drop is gained in the rear by repositioning the rear leaf springs. Leaf spring “eye” hangers offset the mount in the front of the spring up on the frame while a pair of longer shackles do the trick on the rear of the spring. That’s all you need! As seen on Gearz TV with Stacey David “knucklebuster” Shocks are included. Recommended parts: Shock number 1409 (sold each) Shock number 2200 (sold each) Replacement replacement parts: Ball Joint 6117 Bushing Kit BK2356L Lower Control Arms Rear Hanger Shackle Kit\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2456-3\/4\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c-10-3-inch-front-4-inch-rear-complete-lowering-kit-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235027034278,"sku":"DJM2456-3\/4","price":1105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-19b57782509dc50b-hd-white_e3762e52-0dfd-4308-a98e-9a106718ae9c.png?v=1788383110"},{"product_id":"djm-6358-djm2045h-3-4-1-25-8243","title":"1973-1987 C10 3 inch Front \/ 4 inch Rear Complete Lowering Kit (1.25 inch Rotor) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 3 inch Front \/ 4 inch Rear Complete Lowering Kit ( 1.25 inch Rotor) Lowered 3 inch drop spindles in the front work only with 1.25 inch brake rotors. If you have a 1 inch brake rotor use ( DJM2045L-3\/4 ). New leaf spring hangers and longer shackles lower the rear 4 inches. Shocks are included with this kit. DJM Recommends: Front shock 1400 (sold each) Rear shock 2200 (sold each) Drop Spindle Instructions Rear Hanger Shackle Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045H-3\/4 (1.25\u0026amp;#8243;)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-3-inch-front-4-inch-rear-complete-lowering-kit-1-25-inch-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235027165350,"sku":"DJM2045H-3\/4 (1.25\u0026#8243;)","price":860.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/bulk-6c2cf5b86fdd31f3-hd-white_7d9a4a47-eb87-4f2c-80a6-c56d98b5b80f.png?v=1788386291"},{"product_id":"djm-6357-djm2045l-3-4-1-8243-rotor","title":"1973 – 1987 C10 Complete 3 Inch\/4 Inch Kit (1 inch rotor) (Shocks Included)","description":"\u003cp\u003eThe good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1.25″ rotor use ( DJM2045H-3\/4 ). 4″ of drop is gained in the rear by repositioning the rear leaf springs. Leaf spring “eye” hangers offset the mount in the front of the spring up on the frame while a pair of longer shackles do the trick on the rear of the spring. That’s all you need! Shocks are included with this kit. DJM Recommends: Front shock 1400 (sold each) Rear shock 2200 (sold each) Drop Spindle Instructions Rear Hanger Shackle Kit Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM2045L-3\/4 (1\u0026amp;#8243;rotor)\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-complete-3-inch-4-inch-kit-1-inch-rotor-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235027230886,"sku":"DJM2045L-3\/4 (1\u0026#8243;rotor)","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-djm2045h-3-4-1-25-8243-01_b875915c-4977-4512-99eb-1800e15068bd.jpg?v=1788287510"},{"product_id":"djm-6356-djm1120-3-4","title":"1973-1987 C10 3 inch Front \/ 4 inch Rear Complete Lowering Kit (Coil Springs) (Shocks Included)","description":"\u003cp\u003e1973-1987 C10 3 inch Front \/ 4 inch Rear Complete Lowering Kit (Coil Springs) Engineered coil springs in the front lower it 3 inches. Hanger brackets and longer shackles relocate the rear leaf springs for a 4 inch drop. All alignment will be in spec. Shocks are included with this kit. DJM recommends: Front Shock 1309 (sold each) Rear Shock 2200 (sold each) Front Coil Spring Instructions Rear Hanger Shackle Instructions\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eChevrolet — C10 — 1973-1987\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DJM Suspension\u003cbr\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e DJM1120-3\/4\u003cbr\u003e\u003cstrong\u003eSource product:\u003c\/strong\u003e \u003ca href=\"https:\/\/djmsuspension.com\/product\/1973-1987-c10-3-inch-front-4-inch-rear-complete-lowering-kit-coil-springs-shocks-included\/\"\u003eDJM Suspension\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eConfirm cab, drivetrain, brake\/rotor, steering-knuckle, and suspension-specific requirements in the product description before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"DJM SUSPENSION","offers":[{"title":"Default Title","offer_id":57235027263654,"sku":"DJM1120-3\/4","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/3254\/9798\/files\/djm-djm1120-2-4-01_88d72574-3e87-4fdd-95d4-92787e8ab84c.jpg?v=1788287511"}],"url":"https:\/\/dropkitstore.com\/collections\/chevrolet-gmc-c-k-1973-1986.oembed?page=2","provider":"Drop Kit Store","version":"1.0","type":"link"}